Point Load Hook
Harrington offers a special hook for the 1 1/2 and 3 Ton LB lever hoists that is designed to accommodate point loading. This hook is popular in ship and rail yards, where pulling operations can result in hook point loading.

Top Hook Extenders 
LB lever hoists are available with a top hook extender that locates the hoist body aawy from its attachment point. The top hook extender is 18 inches long and is available for 3/4 through 3 Ton LB lever hoists.

Load Limit Warning Handle
An LB lever hoist equipped with a load limit warning handle alerts the operator when the hoist is being used to lift damaging loads beyond rated capacity. The load limit warning handle signals the operator in three ways:
• Sight: The green signal changes to red.
• Feel: The load handle deflects 15-degrees.
• Sound: The handle emits a click when deflected.
The handle resets when you operate the hoist in the down direction.

Inspection Hooks 
Harrington's inspection hook is suitable for applications where inspection of the internal parts of the hook set is required. The inspection hook uses the standard Harrington hook set and is assembled with high-strength locking fasteners instead of rivets. Inspection hooks are available in top and bottom versions for single fall of rivets. Inspection hooks are available in top and bottom versions for single fall of rivets. Inspection hooks are available in top and bottom versions for single fall LB, CB, CF, an NTH model hoists.

LB Optional Accessories